Microbe-Lift Reefscaper Reef & Coral Glue 500g
Reefscaper is a specially developed reef and coral mortar for the quick and secure bonding of reef, stone and ceramic structures or for attaching corals and offshoots in any saltwater aquarium. Reefscaper is free of harmful substances, heavy metal compounds such as chromate and does not contain any undesirable silicate. Reefscaper is easy to use, hardens very quickly and offers an ideal settlement area for e.g. coralline algae and beneficial bacteria.
Tips:
- If sand is used as an extender, it must be clean and dry. We recommend using coral sand in sea water and river or quartz sand in fresh water.
- Always use disposable gloves when modeling Reefscaper.
- When applying to glass, it must be degreased, dry and clean.
Application:
Approx. 3 parts Reef Scaper + 1 part water
Example: 150 g Reef Scaper + 50 g water
setting time approx. 2 minutes
Approx. 2 parts Reef Scaper + 1 part sand + ¾ part water
Example: 100 g Reef Scaper + 50 g Sand + 37.5 g Water
setting time approx. 3 minutes
• Warm water accelerates, cold water delays the setting time.
• The mixing ratio may vary slightly.
• Mix within one minute if possible and use immediately.
• After approximately 24 hours it is completely cured both in air and under water.
Attention, danger!
H315 Causes skin irritation.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
P102: Keep out of reach of children.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338+P310: If in eyes: rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. If you feel unwell, call a POISON CENTER or doctor/physician.
P302+P352+P333+P313: If on skin: wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice.
P261+P304+P340+P312: Avoid breathing dust. If inhaled: remove person to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, call a POISON CENTER or doctor/physician.