Salifert Phosphate Test
 Salifert Phosphate Test for Fresh & Sea Water
 If phosphate is present in too high a concentration, this can lead to increased undesirable algae growth; with a phosphate content of over 0.04 mg/l, the growth of corals and calcareous algae can be reduced by up to 90%.
 Rinsing off thawed fish food (one of the largest sources of phosphate) can significantly reduce phosphate input, just as using a high-quality phosphate-free activated carbon filter can reduce phosphate levels to a minimum.
 The Salifert phosphate test kit detects the existing phosphate content in less than 5 seconds. The test kit includes two different measuring ranges: a low one for phosphate-phosphorus of 0.01 - 1 mg/l and a medium one for phosphate-phosphorus of 0.02 - 2 mg/l.
 Salifert Phosphate Seawater Test
 Color development in less than 5 seconds
 Two concentration ranges are recorded with the same test
 Phosphate is measured in the low range of 0.015 - 1.5 mg/L
 as well as in the middle range of 0.03 - 3 mg/L
 The phosphate content around the coral reefs in the NMW reaches approximately 0.01 to 0.03 mg/L
 The supplied test kit is sufficient for around 60 tests
 Suitable for use in marine and freshwater areas


 Attention, danger!

 H290 May be corrosive to metals.
 H314 Causes severe skin burns and eye damage.
 H315 Causes skin irritation.
 H319 Causes serious eye irritation.
 H335 May cause respiratory irritation.

 P102 Keep out of the reach of children.
 P103 Read label before use.
 P280 Wear protective gloves/protective clothing/eye protection/face protection.
 P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
 P337+P313 If eye irritation persists: Get medical advice/attention.